Stouffville Furnace Repair Services

During those cold Ontario winters, a working furnace is essential to ensuring you can keep your home toasty and comfortable for you and your family. However, like any other home appliance, problems can happen that can reduce not only your furnace’s ability to keep up with your heating demands but also its ability to maintain a comfortable living environment. Therefore, when something goes wrong, you can count on the professional and experienced HVAC team at AtlasCare to provide you with the repair solutions you’re looking for.

AtlasCare has years of experience in the professional HVAC industry and is well-prepared to provide excellent customer service and tailored experiences customized to your unique needs. No matter the size or complexity of the problem at hand, you can rest assured that your furnace and home are in good hands. Our certified HVAC technicians are ready and available 24 hours a day, 365 days a year, including after-hours, weekends, and holidays at no extra cost!

Call and schedule your repair appointment with us directly over the phone or by using our online reservation system! We look forward to partnering with you!

Why is my furnace running but not heating?

We’re sorry to hear that your home’s furnace is operating but not able to provide any heat. There could be several reasons for this issue, and it’s essential to call a repair technician to investigate further to pinpoint the exact cause. Here are a few possible explanations as to why this may be happening:

·  Thermostat settings: Examine your thermostat settings to ensure it is set to the desired temperature and in the proper heating mode. Simple errors, such as a low battery or wrong settings, can, at times, stop the furnace from turning on the heat.

·  Pilot light or ignition system: If your furnace has a pilot light, it may have burned out or is not correctly igniting. To inspect and repair the ignition system, you may need to relight the pilot light or contact a professional technician.

·  Airflow issues: Inadequate airflow can stymie the heating process. Check to see if your filters are dirty or blocked. Filters that are dirty restrict airflow, which may cause the furnace to overheat and turn off the burners. To maintain proper airflow, clean or replace the filters at least once every three months.

·  Blocked vents or ductwork: Blockages in the vents or ductwork can prevent warm air from spreading throughout your residence. Check that no furniture, curtains, or other items are blocking any vents. Examine the ductwork for any damage that may be impeding airflow as well.

·  Malfunctioning components: Several furnace parts, such as the blower motor, limit switch, or gas valve, may be failing. A faulty part may hinder the furnace from effectively generating heat. It is best to contact a qualified HVAC technician who is able to identify and fix the specific problem in this case.

Remember, if you smell gas, hear strange noises, or suspect a serious issue, turn off the furnace right away and call a professional technician.

Is your furnace on the fritz? No need to worry; the team at AtlasCare is here to help! You can be confident that your furnace and home are in good hands, regardless of how big or complicated the problem at hand. Our certified HVAC technicians are available 24 hours a day, 365 days a year, including after-hours, weekends, and holidays at no additional charge!

Call us and schedule your repair appointment over the phone or through our online reservation system!

What to check if your furnace isn’t working?

If your furnace has stopped working, there are a few things you can do to troubleshoot the problem before calling a repair technician. Here are some steps to take to help you determine potential issues:

Step 1: check your thermostat 

Start by double-checking the thermostat settings. Make sure it’s in “heating” mode and that the ambient temperature is greater than the present room temperature. Also, make sure the thermostat has power and, if necessary, replace the batteries.

Step 2: Check the power supply

Check the power supply to ensure that the furnace is receiving power. Check the electrical panel or fuse box to see if the furnace’s breaker has tripped or a fuse has blown. If this is the case, try and reset the breaker or replace the fuse and test the furnace.

Step 3: Check the gas supply

If you have a gas furnace, make sure the gas supply is turned on. Check the primary gas valve near the furnace to make sure it’s in the “on” position. If you believe that there is a gas leak or smell gas, immediately leave and contact your gas company.

Step 4: Check the filters 

Clogged air filters can hinder airflow and cause the furnace to fail. Examine the air filters and wash or replace them if necessary.

Step 5: Check the ductwork and vents

Make sure that all of your home’s supply and return vents are open and unobstructed. Check that no furniture, rugs, or curtains are blocking the vents. Inspect the ductwork for leaks, unsecured connections, and obstructions that might block airflow.

To avoid costly furnace repairs, homeowners should aim to have their furnaces professionally serviced at least once a year. Regular furnace maintenance and cleaning are essential for optimal performance. As such, consider scheduling a professional tune-up if you haven’t already. A technician can clean the furnace, evaluate crucial parts, and diagnose any problems. Furthermore, if you’ve followed these steps and your furnace still isn’t working, it’s time to call a qualified HVAC technician.

Do you think there’s something wrong with your home’s furnace? If so, don’t hesitate to reach out to AtlasCare in Stouffville, Ontario, for help! We’ll have a technician come to your home as soon as possible to take a look at what the problem may be. We’ll then perform the necessary tasks to make sure your furnace system is back up and operating optimally for your needs!

Our certified HVAC technicians are available 24 hours a day, 365 days a year, including after-hours, weekends, and holidays! Call us or use our online reservation system to schedule your repair appointment!

Why can I hear the furnace click on, but it does not fire up?

It can be frustrating to hear your furnace click on but not fire up. There are several possible causes for this problem. Let’s look at some of the reasons in more detail below:

·  Problems with the ignition: The clicking sound you hear is most likely the ignition system trying to light up the furnace. However, if the ignition system is faulty or damaged, the burners may fail to start. This may be due to a defective ignition switch, a worn-out igniter, or a gas valve issue.

·  Problems with the gas supply: If the gas supply to your furnace has been interrupted or limited, the burners will not ignite. Check the operation of other gas-powered appliances in the house to make sure they are in good working order. If you suspect that there is a gas supply issue, contact your gas company right away so that they can look into and fix the problem. Remember to prioritize your safety and never attempt gas supply repairs on your own.

·  Blocked burners: Dust, dirt, hair, or other debris can gather on the burners as time passes, hindering gas flow and averting ignition. Inspect the burners carefully and clean them if there is any buildup.

·  Faulty safety features: To protect against possible dangers, modern furnaces are outfitted with a variety of safety features. If a safety sensor or switch recognizes an unusual condition, the furnace may not start. A faulty flame sensor that does not detect the flame is one example, as is a limit switch that has activated due to overheating.

·  Problems with the thermostat: While not as prevalent, a malfunctioning thermostat can also result in the furnace not firing up. Check the electrical connections and settings on the thermostat to make sure they are proper. Replace the thermostat batteries or reset them to see if that solves the problem.

Remember that working with furnaces poses potential safety hazards, particularly when it comes to gas-related components. It is always best to seek the advice of an experienced technician who can safely determine and fix the issue. They have the knowledge and tools required to ensure that your furnace works safely and efficiently.

Need the help of a professional HVAC technician? Look no further; the team at AtlasCare has got you covered. We understand that furnace problems can occur at any time, including after regular business hours. That’s why our certified HVAC technicians are available to you 24 hours a day, 365 days a year, including after-hours, weekends, and holidays! You can also schedule your repair appointment online using our simple online reservation system. Don’t hesitate to contact us if you need prompt and dependable service to get your furnace back up and running!

What is the process of repairing a furnace?

Repairing a furnace typically involves several steps to identify and resolve the underlying issue. Just keep in mind that the following will vary between homeowners as all repairs are different:

1. Initial visit: A certified HVAC technician will come to your home on the scheduled day to inspect your furnace. They will thoroughly examine the furnace, including its parts, controls, and ignition system, in order to determine the source of the problem. This may entail testing wiring, inspecting gas lines, or measuring airflow and temperature with specialized tools.

2. Description and recommendations: Once the technician has identified the problem, they will explain it to you. They will answer any inquiries you may have and make suggestions for any repairs that are required. They will also provide you with an estimate of the cost involved, including parts and labour, so you know exactly what to expect.

3. Repair Procedure: If you approve the suggested repairs, the technician will perform the required repairs. They will use their knowledge, specialized instruments, and high-quality replacement components to ensure a long-lasting repair. The technician will work hard, respecting your home and cleaning up any mess left behind by the repair.

4. Testing and Verification: Upon finishing the repairs, the technician will test the heating system to ensure it is in proper working order. They will ensure that the burners ignite, the blower motor runs smoothly, and the temperature output corresponds to the wanted setting. This guarantees the repair was successful and that your furnace is operating correctly.